Material stainless steel

surface in KEK finish (roughness 0.2 μm and 0.45 μm, grit of 400)

- Consisting of a stainless steel cover with profiles underneath

- Compartment one-sided / two-sided

- With rear wall / center wall

- Standing on plint

- High 600 mm

Material stainless steel

surface in KEK finish (roughness 0.2 μm and 0.45 μm, grit of 400)

- Frame rack with positioners, connecting struts and of clothes rail made of square tube

- Fixed welded clothes hangers

- Profiles closed off at top with black plastic caps

- 4 stainless steel disc-shaped feet so that differences in floor height can be compensated for
  (adjustment range +/- 10 mm)

- Ground clearance 220 mm

Material stainless steel

surface in KEK finish (roughness 0.2 μm and 0.45 μm, grit of 400)

- Frame rack with positioners made of square tube

- Profiles closed off at top with black plastic caps

- Fixed welded shelves and Partially with profiles underneath

- handle bar made of round tube

- moveable with 4 conductiv castors (two of them lockable)

- Ground clearance 160 mm

- load per shelf 150 kg

- bay load 300 kg

Material stainless steel

surface in KEK finish (roughness 0.2 μm and 0.45 μm, grit of 400)

- worktop with perforations, hole diameter 10 mm, holes in a grid spaced at 15 x 15 mm

- Table frame with positioners and connecting struts made of square tube

- 4 stainless steel disc-shaped feet so that differences in floor height can be compensated for
  (adjustment range +/- 10 mm)

- Ground clearance 220 mm

- load per shelf 150 kg

- bay load 900 kg